Lean Thinking in a UK University Law Clinic: A Reflective Case Study
DOI:
https://doi.org/10.19164/ijcle.v27i1.816Abstract
A law clinic typically involves staff and students in a range of complex processes that are highly resource-intensive and which have the potential to detract from core value-adding activities. This paper aims to highlight the challenges associated with resourcing a university law clinic, and evaluate the extent to which lean management is able to provide solutions. It is submitted that proactive and deliberate application of lean management philosophies to law clinic process design has the potential to both reduce resource intensity and enhance value. A literature review was conducted in order to identify lean management principles and methodologies that might be applicable. A case study approach was then used to evaluate key resourcing challenges faced by a UK university law clinic and to explore the extent to which lean thinking might help to overcome them. There is very little literature which discusses the application of lean thinking in the higher education sector, and none which considers the university law clinic context specifically. This paper will provide law school leaders with a resource that will enable them to evaluate and design their clinic processes more effectively, improving the wellbeing of clinic staff and enhancing the pedagogical value of clinic work for students. It will also contribute to the emerging body of literature which highlights the benefits of lean thinking within the higher education sector.References
Alefari, M., Salonitis, k., & Xu, Y. (2017). The role of leadership in implementing lean manufacturing. Procedia CIRP, 63, 756–761.
Andrés-López, E., González-Requena, I., & Sanz-Lobera, A. (2015). Lean Service: Reassessment of Lean Manufacturing for Service Activities. Procedia Engineering, 132, 23–30.
Abdi, F., Shavarini, S. & Hoseini, S. (2006). Glean lean: how to use lean approach in services industries? Journal of Services Research, 6, 191-206.
Atkinson, P. (2004). Creating and implementing lean strategies. Management Services, 48(2), 18-33.
Balzer, W. K., Brodke, M. H., & Kizhakethalackal, E. T. (2015). Lean higher education: successes, challenges, and realizing potential. International Journal of Quality & Reliability Management, 32(9), 924-933.
Bevilacqua, M., Ciarapica, F. E. & Paciarotti, C. (2015). Implementing lean information management: the case study of an automotive company. Production Planning & Control, 26(10), 753-768.
Bicheno, J., & Holweg, M. (2009). The Lean Toolbox: The Essential Guide to Lean Transformation (4th ed.) Buckingham: PICSIE Books.
Bilgin, A. A., Rowe, A. D., & Clark, L. (2017). Academic workload implications of assessing student learning in work-integrated learning. Asia-Pacific Journal of Cooperative Education, 18(2), 167-183.
Bleadsdale-Hill, L., & Wragg, P. (2013). Models of Clinic and Their Value to Students, Universities and the Community in the post-2012 Fees Era. International Journal of Clinical Legal Education, 19, 257-270.
Bloch, F. S. (Ed.) (2011). The Global Clinical Movement: Education Lawyers for Social Justice. Oxford: OUP.
Brayne, H., Duncan, N., & Grimes, R. (1998). Clinical Legal Education: Active Learning in Your Law School. London: Blackstone Press.
Burgess, T. F., Lewis, H. A., & Mobbs, T. (2003). Academic workload planning revisited. Higher Education, 46(2), 215-233.
Chemerinsky, E. (2009), "Why not clinical education?", Clinical Law Review, Vol. 16, pp. 35-41.
Childe, S. (2017). Case studies in the management of operations. Production Planning & Control, 28(1), 1-1.
Combe, M. M. (2014). Selling intra-curricular clinical legal education. The Law Teacher, 48(3), 281-295.
Dadashnejad, A., & Valmohammadi, C. (2019). Investigating the effect of value stream mapping on overall equipment effectiveness: a case study. Total Quality Management & Business Excellence, 30(3-4), 466-482.
Department for Education. (2018). Review of Post-18 Education and Funding: Terms of Reference. Retrieved from: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/682348/Post_18_review_-_ToR.pdf.
Doman, M.S. (2011). A new lean paradigm in higher education: a case study. Quality Assurance in Education, 19(3), 248-262.
Dunn R., Roper V., & Kennedy, V. (2018). Clinical legal education as qualifying work experience for solicitors. The Law Teacher, 52(4), 439-452.
Emiliani, M.L. (2005). Using "kaizen" to improve graduate business school degree programs. Quality Assurance in Education, 13(1), 37-52.
Emiliani, M. L. (2015). Engaging faculty in Lean teaching. International Journal of Lean Six Sigma, 6(1).
Feld, W. M. (2001). Lean Manufacturing: Tools, Techniques and How to Use Them. Boca Raton: CRC Press.
Forno, A., Pereira, F., & Forcellini, F. (2014). Value Stream Mapping: a study about the problems and challenges found in the literature from the past 15 years about application of Lean tools. The International Journal of Advanced Manufacturing Technology, 72(5-8), 779–790.
Forza, C. (1996). Work Organization in Lean Production and Traditional Plants: What Are the Differences? International Journal of Operations & Production Management, 16(2), 42–62.
Gronroos, C. (1988). Service Quality: The Six Criteria Of Good Perceived Service Quality. Review of Business, 9(3), 10-13.
Hammer, M. (1990). Reengineering work: don't automate, obliterate. Harvard Business Review, 68(4), 103-112.
Henderson, W. (2014). From Big Law to Lean Law. International Review of Law and Economics, 38, 5–16.
Helena Kennedy Centre. (2019). Helena Kennedy Centre for International Justice. Retrievd from: https://www.shu.ac.uk/about-us/academic-departments/law-and-criminology/the-helena-kennedy-centre-for-international-justice.
Hess, J.D., & Benjamin, B. A. (2015). Applying Lean Six Sigma within the university: opportunities for process improvement and cultural change. International Journal of Lean Six Sigma, 6(3), 249-262.
Hogg, D. P. E. (2011). Lean in a Changed World. Manufacturing Engineering, 147(3), 102-113.
Jasti, N. V. K., & Kodali, R. (2015). Lean production: literature review and trends. International Journal of Production Research, 53(3), 867-885.
Johansson, P. E., & Osterman, C. (2017). Conceptions and operational use of value and waste in lean manufacturing – an interpretivist approach. International Journal of Production Research, 55(23), 6903-6915.
Kaplan. R. S., & Norton, D. P. (1992). The Balanced Scorecard - Measures That Drive Performance. Harvard Business Review, 70(1), 71-79.
Kenny, J. D. J., & Fluck, A. E. (2014). The effectiveness of academic workload models in an institution: a staff perspective. Journal of Higher Education Policy and Management, 36(6), 585-602.
Krafcik, J. F. (1988). Triumph of the Lean Production System. Sloan Management Review, 30(1), 41-52.
Kregel, I., & Coners, A. (2018). Introducing Lean Six Sigma to a German municipality: an action research report. International Journal of Lean Six Sigma, 9(2), 221-237.
Kumar, M., Antony, J. Singh, R. K., Tiwari, M. K., & Perry, D. (2006). Implementing the Lean Sigma framework in an Indian SME: a case study. Production Planning and Control, 17(4), 407-423.
Levitt, T. (1980). Marketing Success Through Differentiation-of Anything. Harvard Business Review, 58(1), 83-91.
Leyer, M., Vogel, L., & Moormann, J., (2015). Twenty years research on lean management in services: results from a meta-review. International Journal of Services and Operations Management, 21(4), 389-419.
Marodin, G. A., & Saurin, T. A. (2013). Implementing lean production systems: research areas and opportunities for future studies. International Journal of Production Research, 51(22), 6663-6680.
Narayanamurthy, G., Gurumurthy, A., and Chockalingam, R. (2017). Applying lean thinking in an educational institute – an action research. International Journal of Productivity and Performance Management, 66(5), 598-629.
Motwani, J. (2003). A Business Process Change Framework for Examining Lean Manufacturing: A Case Study. Industrial Management & Data Systems, 103(5), 339–346.
Naidoo, R., Shankar, A., & Veer, E. (2011). The consumerist turn in higher education: Policy aspirations and outcomes. Journal of Marketing Management, 27(11-12), 1142-1162.
Neely, A. D. (1998). Measuring Business Performance. London: Profile Books.
Nicholson, A. (2017). Research-informed teaching: a clinical approach. Law Teacher, 51(1), 40-55.
Ohno, T. (1988). Toyota Production System: Beyond Large-Scale Production, Cambridge, USA: Productivity Press. (Original work published 1978).
Office for Students. (2018). Teaching Excellence and Student Outcomes Framework: Guide to subject-level pilot data. Retrieved from: https://www.officeforstudents.org.uk/media/ea9f3f58-00b6-45ef-bd00-1be029eb7114/ofs-201844a.pdf.
Parasuraman, A., Zeithaml, V.A., & Berry, L.L. (1985). A Conceptual Model of Service Quality and Its Implications for Future Research. Journal of Marketing, 49(4), 41-50.
Pattanaik, L.N., & Sharma, B.P. (2009) Implementing lean manufacturing with cellular layout: a case study. International Journal of Advanced Manufacturing Technology, 42(7), 772-779.
Piercy, N., & Rich, N. (2009). Lean transformation in the pure service environment: the case of the call service centre. International Journal of Operations & Production Management, 29(1), 54 - 76.
Radnor, Z. J., Bateman, N., Esain, A., Kumar, M., Williams, S. J., & Upton, D. M. (2016). Public Service Operations Management: A research handbook. New York: Routledge.
Seth, D., & Gupta, V. (2005). Application of value stream mapping for lean operations and cycle time reduction: an Indian case study. Production, Planning & Control, 16(1), 44-59.
Sfakianaki, E., & Kakouris, A. (2019). Lean thinking for education: development and validation
of an instrument. International Journal of Quality & Reliability Management. https://doi-org.hallam.idm.oclc.org/10.1108/IJQRM-07-2018-0202.
Sheffield Hallam University. (2017). Transforming Lives. Retrieved from: https://www.shu.ac.uk/~/media/home/campaigns/files/transforming-lives.pdf.
Slack, N., Brandon-Jones, A., Johnston, R., & Betts, A. (2015). Operations and Process Management (4th ed). Harlow: Pearson.
Smimou, K., & Dahl, D. W. (2012). On the Relationship Between Students' Perceptions of Teaching Quality, Methods of Assessment, and Satisfaction. Journal of Education for Business, 87(1), 22-35.
Stratton, T.D., Rudy, D.W., Sauer, M.J., Perman, J.A., & Jennings, C.D. (2007). Lessons from industry: one school’s transformation toward ‘lean’ curricular governance. Academic Medicine, 82(4), 331-340.
Thomas, A., Antony, J., Francis, M., & Fisher, R. (2015). A comparative study of Lean implementation in higher and further education institutions in the UK. International Journal of Quality & Reliability Management, 32(9), 982-996.
Vinodh, S., Gautham, S.G. & Anesh Ramiya R. (2011). Implementing lean sigma framework in an Indian automotive valves manufacturing organisation: a case study. Production Planning & Control, 22(7), 708-722.
Womack, J. P., & Jones, D. T. (2003). Lean Thinking (2nd ed). London: Simon & Schuster.
Xiao, J., & Wilkins, S. (2015). The effects of lecturer commitment on student perceptions of teaching quality and student satisfaction in Chinese higher education. Journal of Higher Education Policy and Management, 37(1), 98-110.
Yin, R.K. (2018). Case study research and applications: Design and Methods. Los Angeles: SAGE.
